W-82 is a line array system which is made of a 8＂woofers, a 1.4＂titanium compression driver and high performance low distortion compression driver with innovative horn design of wave phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required,a W-82 will integrate seamlessly with W-12 line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-82 is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
W-12 is a dedicated high performance sub-bass system designed to augment the low frequency output of W-82. W-12 is a sub-bass enclosure which must be flown with W-82. So its physical dimensions are identical to the W-82 and it is equipped with the same proprietary rigging system. It features with a 12＂woofers with magnet structure and suspensions engineered for maximum linear excursion.
| Model |
W-82/W-12 |
|
Type |
Line array system |
|
Line array sub-bass system(W-12) |
|
|
Frequency Response |
70Hz-20KHz±3dB |
|
42Hz-150Hz±3dB(W-12) |
|
|
Power handing |
LF 200W(RMS)400W(PEAK) |
|
HF 60W(RMS)120W(PEAK) |
|
|
400W(RMS)800W(PEAK)(W-12) |
|
|
Sensitivity |
LF 95dB(1W@1M) |
|
HF 108dB(1W@1M) |
|
|
106dB(1W@1M)(W-12) |
|
|
Max@S.P.L |
LF 118dB(PEAK/1M) |
|
HF 126dB(PEAK/1M) |
|
|
132dB(PEAK/1M)(W-12) |
|
|
LF section |
1×8″(210mm) woofer |
|
50mm(2in)coil |
|
|
Components |
1×12″(310mm) woofers |
|
100mm(4in)coil(W-12) |
|
|
Nominal impedance |
8 ohm |
|
8 ohm(W-12) |
|
|
HF section |
1×1.4″compression driver |
|
with 34mm titanium diaphragm |
|
|
Nominal impedance |
8 ohm |
|
Output section |
2-channel |
|
Dispersion pattern |
110°H×9°V |
|
Finish |
Water-proof,wear-resistant textured black paint |
|
Array design |
Arrays of less than 3×W-82 will |
|
provide poor dispersion control and |
|
|
are neither recommended nor supported |
|
|
Speaker cables |
1(+)1(-) |
|
1(+)1(-) (W-12) |
|
|
Rigging system |
Please refer to the W-82 user |
|
manual before any operation |
|
|
Input connectors |
2×NL4MP speakon |
|
Recommend crossover |
70Hz-20kHz |
|
35Hz-120Hz(W-12) |
|
|
Dimensions |
514×235×460mm(W×H×D) |
|
515×450×590mm(W×H×D)(W-12) |
|
|
Package dimensions |
575×305×530mm/0.09cbm |
|
585×520×660mm/0.2cbm(W-12) |
|
|
Enclosure |
PU(W-82)/plywood(W-12) |
|
Net weight |
14kg (W-82)/ 28kg (W-12) |
|
Gross weight |
16kg (W-82)/ 31kg (W-12) |