W-312A is a line array system which is made of one 12” neodymium housed in bandpass box to deliver ultra powerful bass driver, two 6.5”neodymium mid range speaker units of well-designed of waves phase horn loading technique, two 3” titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directive and maximum dynamic impact. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-312A is a compact line array enclosure designed to bring superb line array performance to large stadiums, big outdoor concerts and commercial events. It meets the need for a high power, high bass impact system that is versatile and scalable for a very wide range of applications in the live sound, corporate and fixed installations. W-312A may be used without sub woofers in many applications.It may also be complemented by ground stacked sub woofers Makpro S-218/CV-218B.
| Model |
W-312A |
| Type | Line array system |
| Frequency Response | 45Hz-20KHz±3dB |
| Directivity index(Dl) | 12(±2)1.2KHz-16KHz |
| Power handing | LF 500W(RMS)1000W(PEAK) |
|
MF 300W(RMS)600W(PEAK) |
|
| HF 200W(RMS)400W(PEAK) | |
| Sensitivity | LF 104dB(1W@1M) |
| MF 107dB(1W@1M) | |
| HF 111dB(1W@1M) | |
| Max@S.P.L | LF 131dB(PEAK/1M) |
| MF 132dB(PEAK/1M) | |
| HF 134dB(PEAK/1M) | |
| LF section | 1×12" (310mm)neodymium woofer |
| 75mm(3in)coil | |
| Nominal impedance | 8 ohm |
| MF section | 2×6.5＂(170mm)neodymium MF |
| 50mm(2in)coil | |
| Nominal impedance | 16 ohm |
| HF section | 2×3"neodymium compression driver |
| with 74mm titanium diaphragm | |
| Nominal impedance | 16 ohm |
| Output section | 3-channel |
| Dispersion pattern | 110°H×7°V |
| Finish | Water-proof,wear-resistant textured black paint |
| Array design | Arrays of less than 3×W-312A will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | LF 1(+)1(-) MF 2(+)2(-) HF 3(+)3(-) |
| Rigging system | Please refer to the W-312A user |
| manual before any operation | |
| Input connectors | 2×Neutrik Nl8 |
| Recommend crossover | LF 45Hz-400Hz |
| MF 400Hz-1800Hz | |
| HF 1800Hz-20KHz | |
| Dimensions | 1116×395×530mm(W×H×D) |
| Package dimensions | 1190×470×600mm/0.34cbm |
| Enclosure | Birch plywood |
| Net weight | 62kg |
| Gross weight | 66kg |