W-115A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-28A.W-115A is a sub-bass enclosure which must be flown with W-28A. So its physical dimensions are identical to the W-28A and it is equipped with the same proprietary rigging system. It features with a 15” neodymium woofer with magnet structure and suspensions engineered for maximum linear excursion.
W-28A is a line array system which is made of two 8” neodymium woofers, a 2.5” titanium neodymium compression driver and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-28A will integrate seamlessly with the W-115A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-28A is very versatile and scalable for a wide range of applications in touring performance,corporate and fixed installation fields.
| Model |
W-28A/W-115A |
| Type | Line array system |
|
Line array sub-bass system(W-115A) |
|
| Frequency Response | 60Hz-20KHz±3dB |
| 40Hz-150Hz±3dB(W-115A) | |
| Directivity index(Dl) | 12(±2)1.2KHz-16KHz |
| Power handing | LF 300W(RMS)600W(PEAK) |
|
HF 90W(RMS)180W(PEAK) |
|
| 500W(RMS)1000W(PEAK)(W-115A) | |
| Sensitivity | LF 97dB(1W@1M) |
| HF 108dB(1W@1M) | |
| 107dB(1W@1M)(W-115A) | |
| Max@S.P.L | LF 122dB(PEAK/1M) |
| HF 128dB(PEAK/1M) | |
| 134dB(PEAK/1M)(W-115A) | |
| LF section | 2×8"(206mm) neodymium woofer |
| 65mm(2.5in)coil | |
| Components | 15"(380mm) woofers |
| 100mm(4in)coil(W-115A) | |
| Nominal impedance | 16 ohm |
| 8 ohm(W-115A) | |
| HF section | 1×2.5"neodymium compression driver |
| with 63mm titanium diaphragm | |
| Nominal impedance | 16 ohm |
| Output section | 2-channel |
| Dispersion pattern | 110°H×11°V |
| Finish | Black paint |
| Array design | Arrays of less than 3×W-28A will |
| provide poor dispersion control and | |
| are neither recommended nor supported | |
| Speaker cables | LF 1(+)1(-) HF 2(+)2(-) |
| 1(+)1(-) (W-115A) | |
| Rigging system | Please refer to the W-28A user |
| manual before any operation | |
| Input connectors | 2×NL4MP speakon |
| Recommend crossover | LF 45Hz-1200Hz |
| HF 1200Hz-20KHz | |
| 35Hz-120Hz(W-115A) | |
| Dimensions | 700×232×560mm(W×H×D) |
| 700×480×845mm(W×H×D)(W-115A) | |
| Package dimensions | 770×300×630mm/0.15cbm |
| 770×550×915mm/0.39cbm(W-115A) | |
| Enclosure | Plywood |
| Net weight | 28kg(W-28A) / 60kg (W-115A) |
| Gross weight | 31kg(W-28A) / 64kg (W-115A) |