W-210A is a line array system which is made of two 10” neodymium woofers, two 2” titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-210A will integrate seamlessly with W-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields.
W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210A, W-250A is a sub-bass enclosure which must be flown with W-210A. So its physical dimensions are identical to the W-210A and it is equipped with the same proprietary rigging system. It features with twin 15” neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion.
| Model |
W-210A/W-250A |
|
Type |
Line array system |
|
Line array sub-bass system(W-250A) |
|
|
Frequency Response |
55Hz-20KHz±3dB |
|
40Hz-150Hz±3dB(W-250A) |
|
|
Directivity index(Dl) |
12(±2)1.2KHz-16KHz |
|
Power handing |
LF 500W(RMS)1000W(PEAK) |
|
HF 160W(RMS)320W(PEAK) |
|
|
1200W(RMS)2400W(PEAK)(W-250A) |
|
|
Sensitivity |
LF 99dB(1W@1M) |
|
HF 108dB(1W@1M) |
|
|
112dB(1W@1M)(W-250A) |
|
|
Max@S.P.L |
LF 127dB(PEAK/1M) |
|
HF 127dB(PEAK/1M) |
|
|
143dB(PEAK/1M)(W-250A) |
|
|
LF section |
2×10″(260mm) neodymium woofer |
|
75mm(3in)coil |
|
|
Components |
2×15″(380mm) woofers |
|
100mm(4in)coil(W-250A) |
|
|
Nominal impedance |
16 ohm |
|
4 ohm(W-250A) |
|
|
HF section |
2×2″neodymium compression driver |
|
with 51mm titanium diaphragm |
|
|
Nominal impedance |
16 ohm |
|
Output section |
2-channel |
|
Dispersion pattern |
110°H×9°V |
|
Finish |
Water-proof,wear-resistant textured black paint |
|
Array design |
Arrays of less than 3×W-210A will |
|
provide poor dispersion control and |
|
|
are neither recommended nor supported |
|
|
Speaker cables |
LF 1(+)1(-) HF 2(+)2(-) |
|
1(+)1(-) (W-250A) |
|
|
Rigging system |
Please refer to the W-210A user |
|
manual before any operation |
|
|
Input connectors |
2×NL4MP speakon |
|
Recommend crossover |
LF 45Hz-1200Hz |
|
HF 1200Hz-20KHz |
|
|
35Hz-120Hz(W-250A) |
|
|
Dimensions |
855×293×600mm(W×H×D) |
|
855×440×820mm(W×H×D)(W-250A) |
|
|
Package dimensions |
925×360×670mm/0.22cbm |
|
925×510×890mm/0.42cbm(W-250A) |
|
|
Enclosure |
Birch plywood |
|
Net weight |
42kg (W-210A)/ 81kg (W-250A) |
|
Gross weight |
45kg (W-210A)/ 84kg (W-250A) |